Skip to main content

Fabri-Solvy and Transfer-Eze

We have been getting lots of emails about the difference between Fabri-Solvy and Transfer-Eze.  Both of these great products are printable water soluble film on a paper backing.  You can quickly and easily get your embroidery designs ready to stitch in just seconds with either of them!

The difference between the two name brands is the size of the sheet you print on.  Fabri-Solvy is a FULL 8 1/2” x 11” just like your regular paper.  Transfer-Eze is 8” x 11”, 1/2” smaller than regular paper. 

With either paper, just print your design using your copier putting the Fabri-Solvy or Transfer-Eze in the paper try.  Pull the printed film off the backing paper and finger press onto your fabric.  Add your hoop and embroider right through the film.  You will always have a perfectly accurate design illustration the designer wants you to stitch!  QUICK & EASY.  T-Efilm If you don’t stitch over all the printed lines perfectly – no problem.  When you have finished your stitching, ALL the lines will dissolve leaving only your lovely embroidery!

DissolivingTransfer-Eze Dissolve the film in your sink with a generous amount of warm water.  It is fun to watch the film dissolve in just a few minutes.  I usually can’t be patient so I swish the water around to see the film dissolve.  Having  plenty of water helps everything dissolve.  Rinse the fabric under fresh warm water when you are finished.

Lay your design flat on a bath towel to soak up the water.  I iron  my embroidery wrong side up on the bath towel using a steam iron.  If you want, you can use a little spray starch too to crisp up your design. 

Give Fabri-Solvy or Transfer-Eze a try.  You will be so happy to have a perfect design to stitch in just a very short time….no more using the light box to trace your designs!

Comments

  1. Hi Robin,

    I've only used Transfer-Eze and am so pleased with this product. Not changing since I found this and the "eze" & results. The slight difference in sheet size is not a problem since I do miniature projects. Great product.

    Hugs,
    Joyce

    ReplyDelete
  2. I just received my order and I LOVE the Transfer Eze!!!!!!!!!!!!!!!!! Super simple to use and I really did have my project ready to go in seconds! <3 I'll be using this all the time!

    ReplyDelete
  3. I am doing a fairly large red work design and am using Transfer Eze and LOVE it. It is so easy to work with.

    ReplyDelete
  4. Hi
    Love Transfer-eze. Works like a dream. Will also try the Sulky just to know.

    Pat

    ReplyDelete
  5. love, love love the transfer-eze...but as any great quilter will do...I'll try the new product also!

    ReplyDelete
  6. Thanks for that information - I HATE tracing - even now with my lovely new light box - the idea of photocopying sounds like a dream cpome true. I am off on a hunt for this in Australia.

    ReplyDelete
  7. Wow, didn't know there was a product like this! I'm having a problem with my disappearing pen as it disappears in just a few hours and I like to stitch a little bit every day over the course of a few days.

    One question, has anyone had problems with their floss bleeding while rinsing?

    ReplyDelete

Post a Comment

Popular posts from this blog

Are YOU Taking our RedWork Challenge???

We just had a call from the folks at Road To California Quilt Show. They want to list Your Names for the show book about our Special RedWork Challenge Exhibit . Email your name to me today so we can send soon! info@BirdBrainDesigns.net   Still time to start stitching and send by January 10!!

New Christmas Freebie for you

It is now only 25 days to the BIG Christmas Day.  Whip up a few tea towels or make ornaments with our December Freebie design . I embroidered Santa holding a mini Christmas tree on a Sage Green striped tea towel.  He only took a couple of hours one night to complete.  A hint for you to speed your embroidery.  Thread a crewel embroidery needle for each of the colors in your design.  You won’t always be pulling the thread out and changing color.  This little cutie would make a great ornament too.  Just do the embroidery on muslin and finish in your favorite way.  FUN! I used our handy dandy Transfer-Eze to print the Freebie Santa and finger press on our Dunroven House tea towel.  The Freebie design can be put on your light box to trace directly onto the fabric – BUT – toweling is a little thicker and rougher than muslin.  Using Transfer-Eze solves the problem.  The smooth Transfer-Eze film put on your towel gives you a nice design line to see and a smooth surface to stitch on.  T

Transfer-Eze Embroidery Magic

Lots of us have been having a wonderful time using Transfer-Eze , the NEW water soluble film on paper backing you can use with your printer.  Instead of the tedious task of tracing embroidery designs onto fabric you can print the design on the Transfer-Eze. I printed a snowmen for a new design twice – one for Embroidery and one for Needle Felting on wool fabric.  Just pull the Transfer-Eze film off the paper backing.  To conserve the paper, I cut off one snowman and still have 2/3 of the paper left to print on again later! Dark fabrics are nearly impossible to trace an embroidery design on as the light from your light box doesn’t go through the dark fabric.  Transfer-Eze is just the ticket!   Finger press your printed design on the dark fabric.  I found the Transfer-Eze adhered better to the fabric after the fabric was washed to remove the sizing. The printed design shows beautifully on the film pressed on the dark red fabric. This is going to be EASY to embroider!   Add your hoop