Skip to main content

Embroidery - Front and Back

We get many emails and comments at shows about the back of your embroidery!  Not matter what, when folks pick up your embroidery they immediately turn it over to see the back – what’s up with that?

Keeping the back of your embroidery neat and clean (to satisfy all those snoopy stitchers) is really not hard with just a few hints – I promise. 

When stitching on tea towels, pillowcases and other things that DO NOT have a backing to cover the embroidery like a pillow, table runner or quilt, it is more important to hide your threads.  I don’t use any extra fabric or stabilizers on the back of my embroidery. 
But I do keep it neat and clean- so easy to do!

I begin my embroidery with a very small knot with the tail clipped off.  The knot in the photo below is in the upper right corner hidden under the second stitch I made…you can see the small lump sticking out.  NOT placing the knot at the very end of the design line helps you to hide and support the knot keeping the knot from showing so much from the front.

Beginning Knot

End your embroidery thread when your stitching area is finished by weaving your needle under the stitches Make a back stitch and weave again under more stitches.  Clip the thread close to the embroidery.  This will eliminate loose threads and tails on the back of your work.

Tie Off Stitches4 - Copy

Begin your next thread the same way you ended – just weave the needle under embroidered stitches a couple of times and continue stitching.  Keep your distances short as you move from motif to motif as you embroider.  Then you won’t have long jump stitches that might show from the front.  For “usable” things like towels, clothing or pillowcase, long threads can be snagged and torn with use. 

MoveFrom StitchToStitch - Copy

In the photo above I completed the red area on the right and pass the needle under the green stitches to hold them in place to move left to embroider another red area.  This holds the stitches in place to protect the stitches from snags, keeps the embroidery neat and I won’t have to to use another knot.  Easy, right?

BackOfStitching

This is the finished back of a tea towel.  Just make sure you don’t have long threads joining design areas – you might catch them and pull your embroidery as you use them .

Have fun with your embroidery everyone!

Comments

  1. Great advice. I do mine the same way. My mom taught me those tricks.

    nice job

    cathy

    ReplyDelete
  2. Lovely back. ;-) My DGM taught me to embroider and she always checked the back first! She taught me all those tricks too. Have a happy day!

    ReplyDelete
  3. Great tutorial!
    It's always nice for beginners to have this info ~ I like that you showed it with pics!!!
    Thanks again!
    Prim Blessings
    Robin

    ReplyDelete

Post a Comment

Popular posts from this blog

Are YOU Taking our RedWork Challenge???

We just had a call from the folks at Road To California Quilt Show. They want to list Your Names for the show book about our Special RedWork Challenge Exhibit . Email your name to me today so we can send soon! info@BirdBrainDesigns.net   Still time to start stitching and send by January 10!!

New Christmas Freebie for you

It is now only 25 days to the BIG Christmas Day.  Whip up a few tea towels or make ornaments with our December Freebie design . I embroidered Santa holding a mini Christmas tree on a Sage Green striped tea towel.  He only took a couple of hours one night to complete.  A hint for you to speed your embroidery.  Thread a crewel embroidery needle for each of the colors in your design.  You won’t always be pulling the thread out and changing color.  This little cutie would make a great ornament too.  Just do the embroidery on muslin and finish in your favorite way.  FUN! I used our handy dandy Transfer-Eze to print the Freebie Santa and finger press on our Dunroven House tea towel.  The Freebie design can be put on your light box to trace directly onto the fabric – BUT – toweling is a little thicker and rougher than muslin.  Using Transfer-Eze solves the problem.  The smooth Transfer-Eze film put on your towel gives you a nice design line to see and a smooth surface to stitch on.  T

Transfer-Eze Embroidery Magic

Lots of us have been having a wonderful time using Transfer-Eze , the NEW water soluble film on paper backing you can use with your printer.  Instead of the tedious task of tracing embroidery designs onto fabric you can print the design on the Transfer-Eze. I printed a snowmen for a new design twice – one for Embroidery and one for Needle Felting on wool fabric.  Just pull the Transfer-Eze film off the paper backing.  To conserve the paper, I cut off one snowman and still have 2/3 of the paper left to print on again later! Dark fabrics are nearly impossible to trace an embroidery design on as the light from your light box doesn’t go through the dark fabric.  Transfer-Eze is just the ticket!   Finger press your printed design on the dark fabric.  I found the Transfer-Eze adhered better to the fabric after the fabric was washed to remove the sizing. The printed design shows beautifully on the film pressed on the dark red fabric. This is going to be EASY to embroider!   Add your hoop